Table of Contents
Advertisement
tenna connections
Jfyou are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system.
If you are using a cable TV service (CABLE), see page 15 for Cable TV connections.
Antenna
Antenna
jack
jack
75 ohm coaxial cable
(not supplied)
300-75 ohm matching
transformer (supplied)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
if your combination
VHF/UHF antenna has a 300
ohm twin-Iead wire, the use of the 300-75 ohm
matching transformer may be necessary.
÷
Antenna
jack
300-75 ohm matching
transformer (supplied)
(not supplied)
(not supplied)
Connect the UHF 300 ohm twinqead wire to the
combiner
(not supplied).
Connect the VHF 300
ohm twin-lead wire to the 300-75 ohm matching
transformer. Attach the transformer to the combiner,
then attach the combiner to the antenna jack.
÷
5T 0101B [E]p14-18
Antenna
jack
twin-lead wire
(not supplied)
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-Iead wire to the combiner (not suppiied).
Attach the combiner to the antenna jack.
14
_
3/8/05, 9:55 AM
Advertisement
Table of Contents
