Table of Contents
Advertisement
to optional equipment
(Continued)
MPEG2 sound
You can enioy motion picture and live concert DVD video discs with dynamic realistic sound by connecting
an amplifier
equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Amplifier equipped with anI
MPEG2 audio decoder
[
To COAXIAL l
type digital
To COAXIAL DIGITAL
audio input
AUD!O OUT
75 £2coaxial cable (not supplied)
÷
2 channeB digital
stereo
You can enioy the dynamic sound of 2 channel digital stereo by connecting
an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).
"h
Amplifier equipped with a[
Digital audio input
l
To COAXIAL
l
type digital
To COAXIAL DIGITAL
audio input
AUD!O OUT
75 _2coaxial cable (not supplied)
Y
÷
Notes:
• DO NOT connect the COAXIAL
DIGITAL AUDIO OUT jack of the unit to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible
with the COAXIAL DIGITAL AUDIO
OUT jack of the unit.
• Connect the COAXIAL
DIGITAL AUDIO OUT jack of the unit to the "COAXIAL:' input of a Receiver or Processor.
• Refer to the owner's manual of the connected
equipment as well.
• When you connect the unit to other equipment,
be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• The output sound of the unit has a wide dynamic range. Be sure to adiust the receiver's volume to a moderate
listening
level. Otherwise,
the speakers
may be damaged by a sudden high volume sound.
• Turn off the amp
