Master Sorter 500 Instructions For Use And Maintenance Manual page 25

During the warranty period, the equipment may only be repaired or modified by personnel authorized by the manu-
facturer.
MASTER PRODUCTS is characterized by the continuous improvement of all its equipment. This user manual will con-
tinue to be valid to understand the operation and perform safe maintenance on the purchased equipment, even if
the model is updated with new versions. If the operating characteristics of the purchased equipment differ from that
mentioned in this manual, it is necessary to contact MASTER PRODUCTS technical support or any of its authorized
distributors to obtain assistance and resolve any doubts.
This manual, as well as any documentation supplied by the manufacturer, should be considered as the information
package associated with this equipment. Any user must read and understand this manual before using the equipment.
7. Transport
8. Placement
The Master Sorter 500 must be placed on a flat surface, without irregularities, in which its stability and a good working
position are ensured. It is very important to keep the work area well illuminated and free of obstacles because disorder
leads to accidents.
9. Start-Up
9.1. Assembling
The Master Sorter 500 is delivered completely protected and boxed. First of all, it is necessary to open the box and
check that all the material received is the specified in this manual and is in optimal conditions. If not, contact Master
Products or any of its authorized distributors.
To facilitate the commissioning of the equipment, it is recommended to place all the supplied components on a flat
surface and carry out all the steps detailed below.
Box 212 x 80 x 32 cm = 152 Kg // Equipment net weight = 85 Kg
www.masterproducts.es
25