Aiwa NSX-S223 Operating Instructions Manual page 17

NOTE
Set the tape to the point where recording will start.
* Note that recording will be done on one side of the tape only.
1 Press TAPE.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded
on facing out from the unit.
3 Press TAPE DECK 1/2 to select deck 1.
"TP 1" is displayed.
4 Press @ REC/REC MUTE to start recording.
Playing and recording start simultaneously.
To stop dubbing
Press @..
This function allows you 'to make exact copies' of the original
tape.
¢ Dubbing does not start from a point halfway in the tape.
¢ Note that recording will be done on one side of the tape only.
1 Press TAPE.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
on facing out from the unit. |
3 Press SYNC DUB ito start recording.
The tapes are rewound to the beginning of the front sides,
and recording starts. . ,
To stop dubbing
Press @.
ENGLISH 1/