Changing The On-Screen Display Language; Sdecdng The Antenna Input; Using The Tv/Video Button On The Tv - Toshiba COLORSTREAM 43A10 Owner's Manual

Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on-screen displays. Adjustment menus and messages
will appear in the language of your choice.
To select a language:
1. Press MENU, then press 4 or _" until the SET UP menu appears.
2. Press A or Y to highlight LANGUAGE.
MENU
SET UP
ANT1/2 ANT1
TV/CABLE CABLE
CH PROGRAM
ADD/ERASE ADD
3. Press 4 or _" to highlight your desired language.
Selecting the antenna input
Yon can connect to two different signal sources by choosing the
antenna input (ANT I or ANT 2).
To select the antenna input:
1. Press MENU, then use 4 or _" to highlight the SET UP menu.
2. Press A or Y to highlight ANT 112.
R_L MUTE POW_ER
MENU
SET UP
LANGUAGE ENGLISH
ADD/ERASE ADD
3. Press 4 or _ to highlight either ANT I or ANT 2, depending on
the antenna terminal you wish to use.
Using the TV/VIDEO button on the TV
Yon can monitor or change the signal source that is connected to
the TV. By pressing the TV/VIDEO button on your TV, you can
select the ANT 2, ANT 1, VIDE() 1, VIDE() 2, VIDE() 3, or
ColorStream mode. The signal source you are currently connected
to will be displayed in purple.
To select the antenna input:
1. Press the TV/VIDEO button. The signal source you are
connected to is displayed in purple.
SOURCE SELECTION
ANT
ANT _
VIDEO
VIDEO _
VIDEO 3
ColorStream
2. Press the button until ANT I or ANT 2 is displayed in purple,
indicating the antenna terminal you wish to use.
DD_ MENU TVNIOEO VOLUME CHANNEL
TV/VIDEO
17