Oki ES9466 MFP Copying Manual page 90

3.HOW TO USE EDITING FUNCTIONS
3 Read the following 4 values to specify the area using the left and top scales on the original glass.
 X1: From the top left to the left edge of the selected area
 X2: From the top left to the right edge of the selected area
 Y1: From the top left to the upper edge of the selected area
 Y2: From the top left to the lower edge of the selected area
Note that the marks of the original scale have a 2 mm (0.08") pitch.
4 Key in the read values and specify the repeat count, and press [OK].
Press [X1], [X2], [Y1] and [Y2], and then enter the read value correspondingly.
When you want to change the number of times you repeat the image (repeat count), press either [
 The selected area will be copied from the top right corner in a vertical direction.
 If the repeated image runs over the paper size, that part will not be copied.
Place the original again on the original glass with its face down.
5
Place with its bottom toward you. Align its top left corner against that of the original glass. When you place the
original in a landscape direction, place it with its top pointing to the left edge of the original glass.
90 Copying the Same Image Repeatedly on One Sheet (Image Repeat)
2] or [ 8].