3.HOW TO USE EDITING FUNCTIONS
6
Select other copy modes as required, and then press the [START] button on the control panel.
When the originals are placed on the ADF, scanning and copying start.
When they are placed on the original glass, follow steps 7 and 8.
Place the next original, and then press [Next Copy] on the touch panel or the [START] button on
7
the control panel.
Scanning of the next original starts. Repeat this procedure until the scanning of all the originals is finished.
When the scanning of all the originals is finished, press [Job Finish] on the touch panel.
8
Copying starts.
Inserting a Sheet at a Desired Page (Sheet Insertion) 81