Eg
Pas ape, ile, gi
"Oh sy
0 uy (ln, te, LAG Oe,
i
id
Oy
bey
Electrical Connection - U.S.A. Only
Power Supply Cord
Direct Wire
AWARNING
a
a
Electrical Shock Hazard
Electrical Shock Hazard
Disconnect power before servicing.
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Use 8 gauge copper or 6 gauge aluminum wire.
Plug into a grounded outlet.
Electrically ground range.
Failure to follow these instructions can result in death,
Failure to follow these instructions can result in death,
fire, or electrical shock.
fire, or electrical shock.
1.
Disconnect power.
4.
Add strain relief.
2.
Use Phillips screwdriver to remove the terminal block cover
Style 1: Power supply cord strain relief
screw located on the back of the range. Pull cover down and
toward you to remove cover.
m
Assemble a UL listed strain relief in the opening.
3.
Remove plastic tag holding three 10-32 hex nuts from the
middle post of the terminal block.
A. UL listed strain relief
m
Feed the power supply cord through the strain relief in the
cord/conduit plate on bottom of range. Allow enough
slack to easily attach the wiring to the terminal block.
mg
Tighten strain relief screw against the power supply cord.
11