Table of Contents
Advertisement
Suunto Spartan Ultra
UTM NAD83
•
NZTM2000 (New Zealand)
•
NOTE: Some position formats cannot be used in the areas north of 84° and south of 80°,
or outside the countries that they are intended for. If you are outside the allowed area, your
location coordinates cannot be displayed on the watch.
3.27. Recording an exercise
In addition to 24/7 activity monitoring, you can use your watch to record your training
sessions or other activities to get detailed feedback and follow your progress.
To record an exercise:
1. Put on heart rate sensor (optional).
2. Swipe down or press the upper button to open the launcher.
3. Tap the exercise icon or press the middle button.
4. Swipe up or down to scroll through the sport modes and tap on the one you want to use.
Alternatively, scroll with the upper and lower buttons and select with the middle button.
5. Above the start indicator, a set of icons appear, depending on what you are using with the
sport mode (such as heart rate, GPS and foot POD). These flash gray while searching and
turn green once a signal is found. You can wait for each icon to turn green or start the
recording as soon as you like by pressing the middle button.
6. While recording, you can switch between displays with the middle button or by using the
touch screen if it is enabled.
7. Press the upper button to pause the recording. Stop and save with the lower button or
continue with the upper button.
If the sport mode you selected has options, such as setting a duration target, you can adjust
them before starting the recording by swiping up or pressing the lower button. You can also
adjust sport mode options while recording by keeping the middle button pressed.
TIP: During the recording, you can tap on the screen to get a pop-up that shows current
time and battery level.
If you are using a multisport mode, switch sports by keeping the upper button pressed.
36
Advertisement
Table of Contents
