MTD 19A70068100 Operator's Manual page 5

Assembling Sun Shade
1. Unfold sun shade by
flipping the sun shade
up, and locking the
support in place.
2. Pull sun shade
horizontally to expand.
Lock mechanism on
the underside of the
sun shade as shown in
Figure 4.
3. Rotate the bottom half of the
upright supports and lock into
place as shown in Figure 5.
4. Fasten velcro straps
to secure sun shade
to frame as shown in
Figure 6.
ASSEMBLY & INSTALLATION
Attaching Sun Shade to Support
1.
Figure 4
2.
Figure 5
Figure 6
5
Slide the upright poles of
the sun shade frame into
the support mounted on
the tractor. See Figure 7.
The frame pieces connect
with a spring clip inserted
into the hole of the
connecting part to secure
each piece in place. Press
down on the spring clip
button and slide it inside
the connecting piece until
it snaps in to the hole. See
Figure 8.
Figure 7
Figure 8