Device Installation Order - Western Digital OpenFlex Data24 3200 User Manual

5. Configuration
User Guide

5.1 Device Installation Order

5.1 Device Installation Order
The OpenFlex Data24 3200 holds 1-24 storage drive assemblies. The minimum number of drives required is
1, and drives can be installed in increments of 1 at a time. However, there is a specific installation order that is
recommended in order to optimally balance data load distribution.
Single Add-in Card Configuration
The AIC controls drives 1-24. To balance the IO load optimally, install in the pattern shown in the following
image.
Figure 244: Single Add-in Card Drive Installation Order
166