Table of Contents
Advertisement
Section 7
7.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS
HOURS
BREAK-IN
8
40
(FIRST 10)
X
X
X
X
X
X
X
X
X
x
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions
MAINTENANCE
50
100
150
200
400
X
X
X
X
X
X
X
X
PROCEDURE
Check all hardware for tightness
Check all belts for proper alignment
Change engine oil
*Clean mower
Check condition of blades
Check blade stop system
Check the blade brake cable tension.
Adjust as needed.
Inspect transmission drive belt.
Replace every 400 hours or 2 years,
whichever occurs first.
Check belts for proper alignment
Clean and lubricate the rear drive
wheels
Change engine oil - Perform after
every 50 hours of operation
Check condition of fuel lines
Change engine oil and filter - Perform
after every 100 hours of operation
*Clean air cleaner element
Change engine oil - Perform after
every 50 hours of operation
Check all hardware for tightness
Change engine oil and filter - Perform
after every 100 hours of operation
Replace transmission drive belt
31
COMMENTS
See paragraph 7.5
See paragraph 7.2
See paragraph 7.8
See paragraph 7.6
See paragraph 4.2
See paragraph 6.2
See paragraph 6.5 & 7.5
See paragraph 7.5
See paragraph 7.7
See paragraph 7.2
See paragraph 7.2
See paragraph 7.4
See paragraph 7.2
See paragraph 7.2
See paragraph 7.5
R
Advertisement
Table of Contents
