Table of Contents
Advertisement
Installation Instructions
I
NSTALLATION OF
WARNING:
To avoid risk of personal
injury and property damage, install the
anti-tip bracket provided in accordance
with installation instructions.
Wall Mounting (Figure A)
• Locate bracket 1/2" from floor and 10" from either end
of the oven.
• Secure bracket to wall using the two (2) #12 pan head
wood screws provided. Make sure the screws are
secured to the 2" x 4" floor wood sole plate, or wall
wood studs.
NOTE: Make sure that the top flange of anti-tip bracket overlaps the flange range bottom by a minimum of 3/4''.
©2005 Maytag Services
A
-
NTI
TIP
• Distance from the back wall should be such that when
range is installed, the top flange of the anti-tip bracket
will overlap the flange on the range bottom by about
3/4".
NOTE: The other holes on the wall-mounted bracket are
provided as alternate locations for mounting the 2
screws. If installation of wall bracket is done using the
vertical holes on the bracket, ensure that there is a 2" x
4" stud on the wall behind the bracket.
9
16026509
B
RACKET
A–11
Advertisement
Table of Contents
