2. The WD SmartWare Software Installer screen displays:
3. Click Continue to Install and the installer utility detects that the WD SmartWare
software is not installed:
4. Click Install WD SmartWare to begin the installation.
5. Read the license agreement and click Accept to continue.
6. Type the password that you normally use to access the computer in the Password
box and click OK:
7. Wait for the installation to complete. This could take several minutes:
8. When the installation completes, the WD SmartWare Home screen displays (see
Figure 18 on page 48).
MY BOOK ESSENTIAL
USER MANUAL
USING THE DRIVE WITH A MAC – 47