GE JVM3150 Installation Instructions Manual page 18

Installation Instructions
MOUNT THE OVEN
FOR EASIER INSTALLATION AND PERSONAL SAFETY, WE
RECOMMEND THAT TWO PEOPLE INSTALL THIS OVEN.
IMPORTANT: Do not grip or use handle
during installation.
NOTE: If your cabinet is metal, use the nylon grommet
around the power cord hole to prevent cutting of the
cord.
NOTE: We recommend using filler blocks if the
cabinet front hangs below the cabinet bottom shelf.
IMPORTANT: If filler blocks are not
used, case damage may occur from over
tightening screws.
NOTE: When mounting the
oven, thread power cord
through hole in bottom of
top cabinet. Keep it tight
throughout Steps 1-3. Do
not pinch cord or lift oven
by pulling cord. Lift oven, tilt it
forward and hook
slots at back bottom
edge onto two lower
tabs of mounting plate.
Rotate front of aven up
against cabinet bottom.
18
Cabinet Front
Js
J: Filler Block
[- Equivalent
t i to Depth
' of Cabinet
Recess
Cabinet Bottom Shelf
Self-Aligning Screw
Oven Top
Attach the oven to the top cabinet by inserting
2 self-aligning screws through outer top cabinet
holes, Turn two full turns on each screw. Be sure to
keep power cord tight. Be careful not to pinch the
cord, especially when mounting flush to bottom
of cabinet.
[4 | Tighten the two screws to the top of the oven
completely. (While tightening screws, hold the
oven in place against the wall and the top
cabinet.)
Install grease filters. See the Owner's Manual
packed with the oven.