Table of Contents
Advertisement
TO PLAY A DVD RECORDED IN DOLBY
DIGITAL SURROUND
player that contains a Dolby Digital decoder is connected to the
receiver, you can enjoy theater-quality audio right in your home
when playing discs recorded in Dolby Digital Surround.
1 Press the VIDEO 1/5.1 CH button to select the
VIDEO 1 (DVD or MD) function.
2 Press the VIDEO 1/5.1 CH button again.
RECORDING AN AUDIO SOURCE
TAPE MONITOR
1
connected tothe 5.1 INPUT terminals is selected as a s
3 Start playing the DVD recorded in Dolby Digital
Surround.
To resume the VIDE01, DVD (2 ch stereo) or MD function, press
the VIDEO 1/5.1 CH button again.
• The 5.1 CH function is automatically canceled and the VIDEO
1, DVD or MD function is selected:
- when the Dolby Pro Logic is turned on
1 Select the program source to i be recorded.
2 Set the tape deck or MD recorder to the recording
3 Start the selected program source.
To monitor recorded sound during recording (when the
connected tape deck is a three-head system)
Press the TAPE MONITOR button. 'TAPE ON" appears on the
so that'TAPE OFF" appears.
P
P
93
• Any sound control system has no effect on recording (see page
•Input sound through the 5.1 INPUT terminals cannot be
recorded. When recording the sound from the DVD player,
connect the AUDIO OUT (DOWN MIXING) terminals of the DVD
player to the VIDEO 1/DVD/MD AUDIO IN terminals of the unit.
• When recording sources by the MD recorder connected to the
VIDEO 1/DVD/MD AUDIO OUT terminals, select the source
after pressing the VIDEO 2 or VIDEO 3 button (V2 or V3 should
be displayed).
1 1 ENGLISH
Advertisement
Table of Contents
