Recording An Audio Source - Aiwa AV-D25 Operating Instructions Manual

TO PLAY A DVD RECORDED IN DOLBY
RECORDING AN AUDIO SOURCE
DIGITAL SURROUND -
Digital decoder with the 5.1 ch output terminals. When a DVD
player that contains a Dolby Digital decoder is connected to the
receiver, you can enjoy theater-quality audio right in your home
when playing discs recorded in Dolby Digital Surround.
1 Press the VIDEO 1/5.1 CH button to select the
VIDEO 1 (DVD or MD) function.
2 Press the VIDEO 1/5.1 CH button again.
TAPE MONITOR 1
connected tottie 5.1 INPUT terminals is selected as a source.
3 Start playing the DVD recorded in Dolby Digital
Surround.
1 Select the program source to be recorded.
2 Set the tape deck or MD recorder to the recording
3 Start the selected program source.
To monitor recorded sound during recording (when the
connected tape deck is a three-head system)
Press the TAPE MONITOR button. "TAPE ON" appears on the
step 1 comes back on. To cancel the tape monitor, press it again
• Any sound control system has no effect on recording (see page
• Input sound through the 5.1 INPUT terminals cannot be
connect the AUDIO OUT (DOWN MIXING) terminals of the DVD
player to the VIDEO 1/DVD/MD AUDIO IN terminals of the unit.
• When recording sources by the MD recorder connected to the
VIDEO 1/DVD/MD AUDIO OUT terminals, select the source
after pressing the VIDEO 2 or VIDEO 3 button (V2 or V3 should
be displayed).
Recording cannot be done while the VI indication is displayed
ENGLISH 10