Sony HANDYCAM DCR-HC26 Operating Manual page 71

You cannot use [EXPOSURE].
• You cannot cisc [EXPOSURE] together x_ithNightShot plus.
• If you set [PROGRAM AE], [EXPOSURE] is automatically set to [_ AUTO].
You cannot use [WHT BAL].
• You cannot use [WHT BAH together wilh NightShot plus.
You cannot use [PROGRAM AE].
• You cannot use [PROGRAM AE] together with NightShot plus.
Time code and other information appear on the display of the connected
device.
• Set [DISP OUT] to [LCD] while connected with an A/V connecting cable (p. 48).
You cannot dub correctly using the A/V connecting cable.
• The A/V connecting cabh: is not connected properl 5. Make sure that the A/V connecting
cable is connected to the input.jack of another device for dubbing a picture from your
camcorder (p. 49).
New sound added to a recorded tape is not heard.
• Acljust [AUDIO MIX] from the [STI] (original sound) side until the sound is heard
appropriately (p. 531.
Pictures from connected devices are not displayed correctly.
• The input signal is not NTSC (p. 79).
The computer does not recognize your camcorder. _
• Disconnect the cable from the computer and camcorder, then connect it again securely.
• Disconnect USB devices other than the keyboard, the mouse, and the camcorder from the
/USB).jack on the computer.
• Disconnect the cable from the computer and camcorder, restart the computer, then connect
them again correctly.
An error message appears when you place the supplied CD-ROM in your
computer.
• Set the comput,:r display as follm_ s:
Windows: 800 x 600 dots or more, High Color (16 bits, 65,1100colors) or more
Macintosh: 1,024 x 768 dots or more, 32_000 colors or more
Continued_l_
71