Dubbingsoundto A Recordedtape - Sony HANDYCAM DCR-HC26 Operating Manual

R÷co_di_g pic_u_÷s fr0_ a TV 0r
VCR/DVDdevice, ÷to./god, imbed/
6
Touch [REC START] at the point
you want to start recording.
7
Stop recording.
Touch [_
(Slop) or IRE(? PAUSE].
8 Touch [_ RET.] -_ [_.
Dubbingsoundto a
recordedtape
You can add sound to a tape already
recorded in the 12-bit mode (p. 46) without
erasing the original sound.
Internal stereo
microphone
You can record audio by using the internal
stereo microphoee.
• You cannot record additional audio:
When tile tape has been recorded ill the 16-bit
inode (p, 46).
When the tape has been recorded ill the LP
illode.
When your catllcorder is connected via all
i.LINK cg_ble.
When the tape has been recorded ill 4CH MIC
mode.
On blank sections of the tape.
When the tape has been recorded in a TV
color syslclll
olher than that of your
camcorder (p. 79).
When tile write-protecl lab of lbe cassetle is
sel 1o SAVE (p. 80).
On sections recorded in HDV lormat.
• When you add sound, the picture will not be
oulput hom tile A/V OUT jack. Check the
picture on the LCD screen or tile viewfinder.
hlserl a recorded casselte iulo
yoLIr
camcorder beforehand.
1
Slide the POWER switch
repeatedly to turn on the PLAY/
EDIT lamp.
52