Kenwood KR-897 Instruction Manual page 10

|
FM DE-EMPHASIS/CHANNEL SPACEswitch
(Except for U.S.A. and Canada)
The:FM DE-EMPHASIS / CHANNEL SPACE switch on the rear panel is
set to the correct setting that prevails in the area to which the unit is
shipped. However. if the FM DE-EMPHASIS / CHANNEL SPACE setting
is not matched to the area where the unit is to be used; for instance.
when you moved from area I to area 2 or vice versa, desired reception
of AM / FM broadcasts is not expected. In this case. change the FM DE-
EMPHASIS / CHANNEL SPACE setting in accordance with the area
corresponding to the table The FM DE-EMPHASIS is switched over at
the same time.
OE- AM 1C4_HZ
EMPHAE;IS & -- FM lOOkHz
I - 50_s CHANNEL
SPI SPACE _M gkHz l
FM SOl_tz
%
eWhen changing the setting of the FM DE-EMPHASIS / CHANNEL
SPACE switch, first disconnect the power cord of the amplifier, then
reset the channel space switch, connect the power cord again, and turn
the power on.
CHANNEL FM DE-
Area SPACE freq. EMPHASIS
U.SA, Canada, FM: 1OOkHz 75 ps
1 Hawaii. South AM: 1OkHz
American countries
2 Other countries FM: 50kHz 50 ps
AM: 9kHz