Table of Contents
Advertisement
CONNECTmNG EXTERNAL
VmDEO SOURCES
CONNECTING
AN S-VIDEO SOURCE TO iNPUT 3, 4 AND 5
1,
Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the iNPUT (S-VIDEO) jack, as shown on the TV
set below.
2.
Connect the cable from the AUDHO OUT R of the VCR or the laserdisc player to the HNPUT (AUDHO/R) jack.
3.
Connect the cable from the AUDHO OUT L of the VCR or the laserdisc player to the HNPUT (AUDHO/L) jack.
4.
Press the VHD4 button to view the program from the VCR or laserdisc player. The VHDEO label disappears automaticaly
after approximately
four seconds.
5.
Press the ANT button to return to the previous channel.
[
i
iiiiii!_i!@
iiiiii_
iiii_
iiiiii
!!!!!
iiiii
iiiii
ijjjjjjj
OUTPUT
R
L
V
@ @ @ s-v,0 0
VCR
NOTES:
1.
2.
Completely insert the connection cord plugs when connecting to rear panel iacks.
The picture and sound that is
played back wi/be
abnormaI if the connection is loose.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line
output.
(iNPUT: 3 in example on page 11) Refer to your VCR operating guide for more information on line
input-output connections.
17
Advertisement
Table of Contents
