Table of Contents
Advertisement
CONNECTING
EXTERNAL
VIDEO SOURCES
CONNECTING A STEREO SOURCE TO iNPUT1-_INPUT5
1.
Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the iNPUT (VIDEO) jack, as shown on the TV
set beJow.
2.
Connect the cable from the AUDHO OUT R of the VCR or the laserdisc player to the HNPUT (AUDHO/R) jack.
3.
Connect the cable from the AUDHO OUT L of the VCR or the Jaserdisc player to the HNPUT (AUDHO/L) jack.
4.
Press the VHD4 button to view the program from the VCR or laserdisc player. The VHDEO JabeJdisappears automaticatJy
after approximateJy four seconds.
5.
Press the ANT button to return to the previous channel
OUTPUT
R
L
V
©©©
VCR
NOTES:
1.
2,
CompieteIy insert the connection cord plugs when connecting to rear panel jacks.
The picture and sound that is
played back wiil be abnormal if the connection is loose.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line
output (HNPUT: 3 in example on page 11). Refer to your VCR operating guide for more information on line
input-output connections.
16
Advertisement
Table of Contents
