3/4" Custom Panel Dimensions - GE Monogram ZIC30GNZAII Installation Instructions Manual

30" built-in bottom-freezer, 2-drawer refrigerator
Hide thumbs Also See for Monogram ZIC30GNZAII:
Table of Contents

Advertisement

Available languages

Available languages

Design Guide
3/4" CUSTOM PANEL DIMENSIONS: 80" High Fully Integrated Installation
If you choose to install custom panels, they must be cut to
NOTE:
This product is designed to handle %" panels that
the dirnensions shown. The panels will attach to the door
are made of wood.
and drawers using a hook and bracket system.
33-3/8" x 23" is the maximum opening for a glass
EXTREMELY IMPORTANT: Custom wood panels must be at
window. The opening may be smaller if desired.
least 3/4" thick where hooks and bracket hardware are
attached. Refer to Templates for hook and bracket location.
Routing of the panels is required where the hooks and brackets attach to the panels.
PANELS FOR SOLID DOOR AND DRAWERS
PANELS FOR GLASS DOOR
IMPORTANT NOTE: Maximum pane! weight:
29-3/8"
+
29-3/4" ——+l
A Fresh Food Door Panel: 33 Ibs.
fee
B Freezer Drawer Panel: 9 lbs.
€ Convertibe Drawer Panel: 19 Ibs.
»
A
45-3/8"
45-3/8
33-3/8"
Bt
23°
door frame.
22-3/4"
c
-Cy-
Design Tip: Some amount of each panel will be visible on the interior side
|
rl
=
of the unit. It is recommended that both sides of each panel be finished.
it
"
Design Tip: If using custom panels, a cutom toe kick should be considered.
a
m a r e
F
The Bottom of case is white.
3/4" CUSTOM PANEL DIMENSIONS: 84" High Fully Integrated Installation
If you choose to install custorn panels, they must be cut to | NOTE: this product is designed to handle 34" panels that
the dimensions shown. The panels will attach to the door
are made of wood.
and drawers using a hook and bracket system.
33-3/8" x 23" is the maximum opening for a glass
EXTREMELY IMPORTANT: Custom wood panels must be at least
window. The opening may be smaller if desired.
3/4" thick where hooks and bracket hardware are attached.
Refer to Templates for hook and bracket location.
Routing of the panels is required where the hooks and brackets attach to the panels.
PANELS FOR SOLID DOOR AND DRAWERS
PANELS FOR GLASS DOOR
IMPORTANT NOTE: Maximum panel weight:
|.
29-3/4* —+|
A Fresh Food Door Panel: 33 Ibs.
F_
|-— 29:3/4 —
B Freezer Drawer Panel : 9 Ibs.
€ Convertible Drawer Panel: 19 Ibs.
49-3/8
49-3/8"
33-3/8"
|
73" ——»|
bao" tT]
|
|e
*Styles must be a min 3-3/8" to cover
_—
sae")
fe
|
3.3/9"
aluminum door frame.
22-3/4"
¢
oe
Design Tip: Some amount of each panel will be visible on the interior side of
fs
the unit. It is recommended that both sides of each panel be finished.
I
-O-
Design Tip: If using custom panels, a cutom toe kick should be considered. The
{Bottom
of case is white.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Monogram zik30gnzbii

Table of Contents