Installation - Graco XM PFP Instructions-Parts List Manual

Hot water flush kit

Hide thumbs Also See for XM PFP:

Table of Contents

Installation

The equipment must be grounded to reduce the risk

of static sparking and electric shock. Electric or static

sparking can cause fumes to ignite or explode.

Improper grounding can cause electric shock.

Grounding provides an escape wire for the electric

current.

Optional Location 1

See F

. 1 on page 5 and F

1. Use four bolts (4) to install the bracket (2) onto the

system frame.

. 3: Optional Location 1

. 3.

Get other manuals https://www.bkmanuals.com

2. Use four bolts and nuts (4, 5) to install tank (1) onto

bracket (2).

3. Follow Connect Air Supply, page 8. Connect air

hose (8) to circulation pump (53) and diaphragm

pump (P) on the PFP system.

4. Connect suction hose (F) to the flush pump and

insert in the hot water flush tank.

5. Connect heater power cable.

a. Model 24Y132: With the heater ON/OFF toggle

switch (H) OFF, connect power cable to the

corded receptacle hanging below the junction

box on the XM PFP sprayer.

b. Model 24X113: With the heater ON/OFF toggle

switch (H) OFF, route the heater power cable

through the Flush Heater cord grip. See F

page 5. See system manual for power connec-

tion.

. 2,

332073C

Table of Contents