Advertisement
@
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each
speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement
of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and
Surround Speakers.
,---._
Ideal CENTER SPEAKER placement
Ideal SURROUND
SPEAKER placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND
SPEAKER
• Setting CENTER
SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the
table.
Distance between at and Dc
Delay Time
20 inches
1.3 ms
40 inches
2.6 ms
5 feet
3.9 ms
6 feet 6.6 inches
5.3 ms
Distance between Ds and DC
Delay Time
6 feet 6.6 inches
5.3 ms
13 feet 3.3 inches
40.6 ms
20 feet
_5.9 ms
• Setting
REAR (SURROUND)
SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Speaker delay time setting is a professional s ound volume adjustment method for audio
enthusiast. For home use, refer to "Setting up the ideal Speaker Positions" on page 11
to installspeakers in appropriate locations,
36
Advertisement
