Advertisement
Remove the battery cover on the back of the remote by pressing
down and sliding the cover in the direction of the arrow.
B
2
Insert two 1.5V AAA batteries, paying attention to the correct polarities (+
and -).
Replace the battery cover.
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (-)to (-).
• Use the correct type of batteries.Batteries that look similar may differ in voltage,
• Always replace both batteries at the same time,
• Do not expose batteries to heat or flame,
The remote control can be used up to approximately
23 feet/7 meters in a straight line. It can also be
operated at a horizontal angle of up to 30 ° from the
remote control sensor.
!,
To open the remote control cover,
push the top of the cover, then slide
downward.
10
Advertisement
