Position and assignment
L1+
M1
M2
L2+
Figure 6-1
Contact
L1+
M1
M2
L2+
6.4
Functional ground
EMC disturbances are diverted to ground via the functional ground. This ensures the immunity
of the data transmission. The functional ground must be implemented with low impedance. The
connection of the functional ground must be established directly on the mounting plate or the
DIN rail terminal.
The device has a grounding screw (filister head screw with clamping washer and washer) on
the bottom of the enclosure for the functional ground:
SCALANCE LPE9413 Industrial Edge Device
Operating Instructions, 07/2023, C79000-G8976-C703-01
SIEMENS
A
P1
P2
P3C
L1
L2
USB X1
SET
P1
P2
L1+
M1
P3
M2
C
L2+
Position of the power supply and assignment of the terminal block
Assignment
24 V DC
Ground
Ground
24 V DC
Connecting up
6.4 Functional ground
49