Set Temperature - Cal Spas PATIO Owner's Manual

Main Screen
Heater On Heater Off
Note: the Heater Status icon flashes
during heater start-up; this is normal.
Balboa Water Group | Your Single Source Solution
44
CHANGE THE

SET TEMPERATURE

A
B Follow these steps to change the Set Temperature:
1 - Start at the Main screen (A). Press the SELECT
navigation button to view the temperature menu (E).
C
2 - Press the RIGHT and/or LEFT navigation buttons to
change the Set Temperature.
The center box (D) indicates the current Set
Temperature. In this example the current Set
Temperature is 102.
3 - Once your desired Set Temperature is in the center
box (D), press the SELECT navigation button, or just
D
wait a few seconds.
E The change is complete.
How do I view the Water Temperature?
The Water Temperature is displayed here (B) on the
Main screen.
F
How do I view the Set Temperature?
Start at the Main screen (A), and press the SELECT
navigation button. The Set Temperature is displayed in
the center box of the temperature menu (D).
How do I know when the water heater is On?
The center of the Heater Status icon turns red (C) when
the heater is On, and it turns white when the
heater is Off.
What do the dashes indicate (F)?
When the spa is powered On, four dashes appear
(F) in the Water Temperature display for one minute.
The dashes indicate that the spa is checking the
water temperature. After the pump runs for 1 minute,
the dashes disappear and the water temperature is
displayed (B). The dashes may reappear after the pump
has not run for one hour.

43