HP 250 Operating page 140

In Case of Difficulty
After selecting the type of plotter paper, you will be presented
with several different paper sizes. If you are not sure of the
type of paper to use, see Chapter 7 of this manual.
When you have provided all of the plotter paper information, the
following menu appears:
HP 2S0 PLOTTER/SYSTEM CONFIDENCE TEST
Plotter: HP 72215 Gr'aphlcs Plotter.
'Plotter address: 8
Test: SIMPLE
Paper: ISO A4 size plot (210 mm x 297 mm) on metnc r'oll paper.
When ready to start plotting, please push START PLOTTH~G.
I
EXlT START
I
PLOTTING
I~
II I I
DDDDDDDD
Press the START PLOTTING softkey to begin the test. At any time
during the test, you may press the ABORT PLOT softkey.
When the test is complete, the following menu appears:
10-19
In Case of Difficulty
After selecting the type of plotter paper, you will be presented
with several different paper sizes. If you are not sure of the
type of paper to use, see Chapter 7 of this manual.
When you have provided all of the plotter paper information, the
following menu appears:
HP 2S0 PLOTTER/SYSTEM CONFIDENCE TEST
Plotter: HP 72215 Gr'aphlcs Plotter.
'Plotter address: 8
Test: SIMPLE
Paper: ISO A4 size plot (210 mm x 297 mm) on metnc r'oll paper.
When ready to start plotting, please push START PLOTTH~G.
I
EXlT START
I
PLOTTING
I~
II I I
DDDDDDDD
Press the START PLOTTING softkey to begin the test. At any time
during the test, you may press the ABORT PLOT softkey.
When the test is complete, the following menu appears:
10-19