Mouse Mode; Orientation - Wacom Intuos3 12x19 User Manual

Mouse mode

The default M for the Intuos3 mouse is M
ODE
With M mode selected, the M
OUSE
The M you select controls how the screen cursor moves. In
ODE
the screen cursor moves with relative positioning.
Sets the screen cursor acceleration
when in M mode.
OUSE
Note: You can also switch between P
See customizing the Pop-up Menu
M mode, you can assign the M
OUSE

Orientation

You can choose a different tablet O
you have made. This feature can be useful if you prefer to work with the tablet controls on the bottom or
either side of your tablet, or if you are working with a tall monitor.
• L . Tablet orientation is horizontal, with the tablet status LED at the top. This is the default
ANDSCAPE
setting.
• P . Rotate the tablet 90 degrees clockwise so the tablet status LED is located on the right side.
ORTRAIT
• L F
ANDSCAPE LIPPED
• P F . Rotate the tablet 90 degrees counter-clockwise so the tablet status LED is located
ORTRAIT LIPPED
on the left side.
After making changes, verify you have the correct setting for your tablet orientation. Do this by moving your
tool "up" on the tablet – the screen cursor should move up as well.
Note: The orientation you select applies to all tools and applications.
C
OUSE
tab looks like this:
APPING
mode and M
EN
for more information. If you frequently switch between P
T
ODE OGGLE
RIENTATION
. Rotate the tablet 180 degrees so the tablet status LED is located near the bottom.
C
I
ONTENTS
NDEX
mode.
M mode,
OUSE
mode by using the screen Pop-up Menu.
OUSE
... function to one of your tool buttons.
and then physically rotate your tablet to match the selection
I
ONTENTS NDEX
C
USTOMIZING
Select the O of your
RIENTATION
tablet.
Note: Except for tablet
O , all mapping
RIENTATION
settings apply to a specific
Intuos3 tool.
Select a slower or faster screen
cursor tracking speed when in
M mode.
OUSE
Returns the tab settings to their
factory default conditions.
mode and
EN
39
39