Table of Contents
Advertisement
Your channel number will appear.
Frequencies are scanned in ascending order. When a station
is tuned in, scanning
stops and the
NOTE: You can also tune using the remote control. First press the AM or FM b
'
%
g
7
utton
MEMORY" light appears.
If you do not want to preset this station, press the AUTO
—}
on the remote, then enter the channel number using the PRESET buttons (+ and -)
MEMORY button within 4 seconds. Scanning restarts without presetting that station.
a the iiss Press + to increase the selected number, and press — to lower the
select
eT:
When the MEMORY light disappears, scanning continues until one of the following occurs:
Manual Presetting
To use manual presetting to assign channel numbers to your favorite stations, follow these
: counoharrael pepe ig Tange is reached
+
All 40 channel numbers have been assigned
MEMORY
Step 1 Tune to a station. If necessary, follow the procedure
'
on page 15.
ated
eee
:
Cc)
Step 2
fa
sarin:
When Auto Presetting is completed, the last preset station is received.
The "MEMORY" light appears in the display window.
NOTE: To stop scanning at any time, press either TUNING button once.
Step 3 oe
ee
through 40). This number
is the channel
number
you are assigning
to the station.
;
Searching
for c Preset
When you lose the preset number of a desired station, use the Preset Scan function to
find the
airs ally You must enter the channel number while the "MEMORY" light is on.
Station ee
station. Follow these steps:
enki about 5 seconds to do this. if the light disappears before you enter the
number, press the MEMORY button again.
PRESETSCAN
Step 1 Press the PRESET SCAN button.
Step 4 When
the MEMORY light disappears and the channel number is displayed, presetting
[3
The receiver runs upward in sequence through the preset channels. You will hear the
is completed.
sound of each channel for 4 seconds while the corresponding channel number
blinks.
Step 2
When you find the desired station, press the PRESET SCAN button
again.
Scanning stops.
NOTE: Scanning ends when one cycle of 40 channels is completed. The
receiver
returns to the previous station.
16
Page
Page 17
1-18 (No. 20376)
(No. 20376) 1-19
Advertisement
Table of Contents
