Appendix A - Model Number; Nomenclature - Bryant 559K 08 Series Service And Maintenance Instructions

Position: 1
Example: 5
Unit Type
559 = Cooling RTU with Optional
Electric Heat, Legacy™ Line
Model
K = Puron ® (R-410A) Refrigerant
with Axion Fan
Voltage
E = 460-3-60
P = 208/230-3-60
T = 575-3-60
Cooling Tons
08 = 7.5 tons
09 = 8.5 tons
12 = 10 tons
14 = 12.5 tons
16 = 15 tons
Refrig. System Options
N = Two-Stage Cooling Models/Single Circuit
R = Two-Stage Cooling Models/Single Circuit with
Perfect Humidity™ Dehumidification System
Heat Level
(Field-installed electric heaters available)
000 = No Heat
Coil Options (RTPF) (Outdoor – Indoor – Hail Guard)
A = Al/Cu – Al/Cu
B = Pre-coat Al/Cu – Al/Cu
C = E-coat Al/Cu – Al/Cu
D = E-coat Al/Cu – E-coat Al/Cu
E = Cu/Cu – Al/Cu
F = Cu/Cu – Cu/Cu
M = Al/Cu – Al/Cu – Louvered Hail Guard
N = Pre-coat Al/Cu – Al/Cu – Louvered Hail Guard
P = E-coat Al/Cu – Al/Cu – Louvered Hail Guard
Q = E-coat Al/Cu – E-coat Al/Cu – Louvered Hail Guard
R = Cu/Cu – Al/Cu – Louvered Hail Guard
S = Cu/Cu – Cu/Cu – Louvered Hail Guard
APPENDIX A — MODEL NUMBER NOMENCLATURE
2 3 4 5 6 7 8
5 9 K P 0 8 N
Fig. A — Model Number Nomenclature
9 10 11 12 13 14 15 16 17
0 0 0 A 2 A 0 A
Factory Installed Options
0A = None
Outdoor Air Options
A = Electromechanical controls. Allows for use of all
field-installed economizers and dampers.
B = Temperature Economizer, Barometric Relief,
Low Leak (W7220)
E = Temperature Economizer, Barometric Relief,
Low Leak with CO
H = Enthalpy Economizer, Barometric Relief,
Low Leak (W7220)
L = Enthalpy Economizer, Barometric Relief,
Low Leak with CO
U = Temperature Economizer, Barometric Relief,
Ultra Low Leak (W7220)
W = Enthalpy Economizer, Barometric Relief, Ultra Low Leak
(W7220)
Axion Fan — Van Axial — Indoor Fan Options /
Filter Switch Options
2 = Direct Drive — Axion Fan — Standard/Medium Static
Option
3 = Direct Drive — Axion Fan — High Static Option
5 = Direct Drive — Axion Fan — Standard/Medium Static
Option and Filter Status Switch
6 = Direct Drive — Axion Fan — High Static Option and
Filter Status Switch
59
A
Packaging and Control
A = Standard Packaging, electromechanical
controls, no intake or exhaust option. Will
allow for use of all field-installed econo-
mizers, manual or two-position damper.
B = LTL Packaging, electromechanical
controls, no intake or exhaust option. Will
allow for use of all field-installed econo-
mizers, manual or two-position damper.
C = Standard Packaging, electromechanical
controls that require W7220 EconoMi$er
F = LTL Packaging, electromechanical
controls that require W7220 EconoMi$er X
Note: See the 559K 7.5 to 15 ton Price
Pages for a complete list of factory
installed options.
(W7220)
2
(W7220)
2
® X