Advertisement
DSP—1
® HIGH (High frequency Reverb Time Ratio: 0.1 — 1.0)
This shows the high frequency reverberation time
ratio to the REV TIME which is the middle
frequency reverberation time. The more the value
is decreased, the more the high frequency
reverberation time is shortened.
@ REV LVL (Reverb Level: 0 — 100%)
This shows the level of the rear reverberation is
lengthed. The more the value is increased, the
greater the reverberation.
Time
25
Æ DOLBY SURROUND
This program is used to play the video discs, etc.
(such as movie program sources) with " DO DOLBY
SURROUND" indication. Input the monaural signal
and turn the INPUT BALANCE control on the rear
panel of this unit so that the sound heard from the
rear sub speakers becomes minimum. Once the
adjustment is performed on this Dolby Surround
mode, the optimum effect will be obtained in other
~ modes.
1 DELAY (Delay Time: 15.0 ms — 30.0 ms)
- your preference.
DO [pocsy sumrdun)
|
* Manufactured under license from Dolby Laboratories
Licensing Corporation. Additionally license under one
or more of the following patents: U.S. numbers
3,632,886, 3,746,792 and 3,959,590; Canadian
numbers 1,004,6003 and 1,037,887. "Dolby" and the
Double-D symbol are trandemarks of Dolby
Laboratories Licensing Corporation.
Original source sound
Level
|
FL
FR
RL
RR
- Time
RR DLY
1
FL DLY (Front L-ch Delay Time: 0.1 ms — 600.0 ms)
Starting time between the original source sound and
the front left-channel effect sound. The more value is
increased, the greater the delay of the left channel
effect is heard.
Advertisement
