Install Your New Ata - Cisco ATA 191 User Manual

Analog telephone adapter

Hide thumbs Also See for ATA 191:

Table of Contents

Get Started with Your New ATA

Install your new ATA

Your ATA comes with everything to power it up, connect it to the network, and set it up on your desk.

Before you begin

Before you begin the installation, make sure you have the following equipment:

• Ethernet cable to connect to your network.

• Analog phone or fax machine to connect to your ATA.

• Phone cable to connect your phone.

• Uninterruptible power supply (UPS) to provide backup power.

Procedure

Step 1

Connect the network cable to your network and to the NETWORK port on the ATA.

Step 2

Connect the phone cable to the PHONE 1 port on the ATA and to your analog device (phone or fax machine).

• Data devices, such as facsimile machines and modems, may not function optimally. For the best

fax and modem performance, continue to use a dedicated PSTN line.

Cisco ATA 191 Analog Telephone Adapter User Guide for Cisco Unified Communications Manager

Install your new ATA

Table of Contents