Cisco ATA 191 User Manual page 17

Manage the ATA Using the IVR
Menu Option
110
111
120
121
130
131
160
161
220
221
230
231
600
601
606
610
611
620
621
622
623
630
IVR Action
(IPv4) Show the ATA IP address
(IPv4) Configure the ATA's static IP
address
(IPv4) Show the subnet mask
(IPv4) Configure the subnet mask
(IPv4) Check the gateway IP address
(IPv4) Configure the gateway IP address
(IPv4) Check the primary DNS Server
setting
(IPv4) Set the primary DNS Server
(IPv4) Show the TFTP server address
(IPv4) Configure the TFTP server address
Show the VLAN.
Configure a VLAN.
(IPv6) Check the IPv6 Internet addressing
method
(IPv6) Set the IPv6 Internet Addressing
Method
Check IPv6 Auto Configuration.
(IPv6) Show the ATA IP address
(IPv6) Configure the ATA's static IP
address
(IPv6) Check the IP address prefix length
(IPv6) Configure the static IP address
prefix length
(IPv6) Check the TFTPv6 server address
(IPv6) Set the TFTPv6 server address
(IPv6) Check the gateway IP address
Cisco ATA 191 Analog Telephone Adapter User Guide for Cisco Unified Communications Manager
IVR Configuration Menu Options
Notes
Available in static IP mode only.
Available in static IP mode only.
Available in static IP mode only.
To enable a VLAN, set the VLAN ID from
1 to 4094.
To disable a VLAN, set the VLAN ID to
4095.
0: DHCP; 1: Static IP
0: Disabled; 1: Enabled.
Available in IPv6 static IP mode only.
Available in IPv6 static IP mode only.
13