Expansion Slots (Pci Express Slots) - ASROCK EC262D4U-2L2T User Manual

Table of Contents

Advertisement

2.6 Expansion Slots (PCI Express Slots)

There are 4 PCI Express slots on this motherboard.
PCIE slots:
PCIE4 (PCIe 4.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE5 (PCIe 4.0 x4 slot) is used for PCI Express x4 lane width cards.
PCIE6 (PCIe 5.0 x16 slot) is used for PCI Express x16 lane width cards.
PCIE7 (PCIe 4.0 x4 slot) is used for PCI Express x4 lane width cards.
Slot
PCIE 7
PCIE 6
PCIE 5
PCIE 4
Installing an expansion card
Step 1.
Before installing an expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before starting the installation.
Step 2.
Remove the system unit cover (if the motherboard is already installed
in a chassis).
Step 3.
Remove the bracket facing the slot that intending to use. Keep the
screws for later use.
Step 4.
Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
Step 5.
Fasten the card to the chassis with screws.
Step 6.
Replace the system cover.
20
Generation
Mechanical
4.0
5.0
4.0
4.0
Electrical
x4
x4
x16
x16
x4
x4
x1
x1
Source
CPU
CPU
PCH
PCH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ec266d4u-2l2t

Table of Contents