ASROCK EPC612D8 Quick Installation Manual

*15G065023100AK*
P/N: 15G065023100AK V1.0
Quick Installation Guide
EPC612D8 / EPC612D8A / EPC612D8A-TB
The server board User's Manual is available for download from the ASRock Rack's official website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board's components due to static electricity, NEVER place your
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag
that comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
2 Motherboard Layout
1
LAN1
LAN2
(NCSI)
USB 2.0
T: USB_1
B: USB_2
TBT1
49
DP_IN1
REAR_FAN1
USB 3.0
Top:
T: USB3_2
IMPI_LAN
B: USB3_1
48
1
HD_AUDIO1
CHASSIS_ID2
47
CHASSIS_ID1
46
1
NUT5
HDMI_SPDIF1
45 EPC612D8A-TB
44
BMC
ROM
CHASSIS_ID0
43
1
COM2
BMC_SMB_1
BMC_SMB_2
1 1
42 41 40 39
3
I/O Panel
1 3
4 5
2
No. Description
1 Serial Port (COM1)
2 VGA Port (VGA1)
3 LAN RJ-45 Port (LAN2)
4 LAN RJ-45 Port (LAN1) (NCSI)
5 USB 2.0 Ports (USB_1_2)
6 Thunderbolt Port (TB1)*
*Supports EPC612D8A-TB only
**Supports EPC612D8A only
24.4cm (9.6 in)
DDR4_C1 (64 bit, 288-pin module)
DDR4_C2 (64 bit, 288-pin module)
DDR4_D1 (64 bit, 288-pin module)
DDR4_D2 (64 bit, 288-pin module)
DDR4_B2 (64 bit, 288-pin module)
DDR4_B1 (64 bit, 288-pin module)
DDR4_A2 (64 bit, 288-pin module)
DDR4_A1 (64 bit, 288-pin module)
PCIE7
CMOS
PCIE6 Battery
PCIE5
RoHS
NUT4 NUT3 NUT2 NUT1
PCIE3
PECI1
1
128Mb
BIOS
BUZZER1
PCIE1
NMI_BTN1 SPEAKER1 TR1 PANEL1
1 1
1 FRONT_FAN3
BMC_SMB_3 IPMB_1
USB_5
1
1
1 AUX_PANEL1
38 37 36 35 34 33 32
10
8 11
6 7 9 12
No. Description
7 Display Port Input (DP_IN1)*
8 LAN RJ-45 Port (IPMI_LAN)
9 USB 3.0 Ports (USB3_1-2)
10 Front Speaker (Lime)**
11 Microphone (Pink)**
12 Line In (Light Blue)**
1 Install the Server Board
1
Insert the server board into the chassis.
2
A f f i x t he screws clock w ise into t he
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
2 3 4
PSU_SMB1
1
ATX12V1
ATXPWR1
CPU_FAN1
1
USB3_3_4 TPM1
FRONT_FAN2
FRONT_FAN1
Intel
C612
SATA_SGPIO1 1
SATA_SGPIO3
Dr.
Debug
1
SATA_SGPIO2 1 1
USB_3_4
SATA_PWR1
SATAPWR1
SATA_0
31 30 29 28 27 26 25
4 Jumper Cap On/Off
When the jumper cap is placed on the pins, the
jumper is "Short". If no jumper cap is placed on the
pins, the jumper is "Open".
The illustration shows a 3-pin jumper whose pin1
and pin2 are "Short" when a jumper cap is placed on
these 2 pins.
No. Description
2 x 288-pin DDR4 DIMM Slots (DDR4_C2, DDR4_
1
D2, White)
2 x 288-pin DDR4 DIMM Slots (DDR4_C1, DDR4_
2
D1, Blue)
3 ATX 12V Power Connector (ATX12V1)
5
4 PSU SMBus (PSU_SMB1)
5 ATX Power Connector (ATXPWR1)
6
6 CPU Fan Connector (CPU_FAN1)
2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_
7
B2, White)
2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_
8
B1, Blue)
9 USB 3.0 Header (USB3_3_4)
7
10 TPM Header (TPM1)
8
11 SATA3 Connector (M_SATA_1), White
9
12 SATA3 Connector (M_SATA_0), White
10
13 Front Fan Connector (FRONT_FAN2)
14 Front Fan Connector (FRONT_FAN1)
11
15 SATA3 Connector (SATA_4), White
12
16 SATA3 Connector (SATA_3), White
17 SATA3 Connector (SATA_2), White
13
18 SATA3 Connector (SATA_1), White
14
15 19 SATA3 Connector (SSATA_1), White
16
20 SATA3 Connector (SSATA_0), White
17
21 SATA SGPIO Connector (SATA_SGPIO1)
18
22 USB 2.0 Header (USB_3_4)
19
23 SATA SGPIO Connector (SATA_SGPIO3)
20
24 SATA3 DOM Connector (SATA_0), Red
21
25 SATA DOM Power Jumper (SATAPWR1)
26 SATA SGPIO Connector (SATA_SGPIO2)
22
27 SATA3 Connector (SATA_5), White
23
28 SATA3 Connector (SSATA_2), White (Marvell 9172)
29 SATA3 Connector (SSATA_3), White (Marvell 9172)
30 SATA DOM Power Header (SATA_PWR1)
24
31 Vertical Type A USB 2.0 (USB_5)
32 Front Fan Connector (FRONT_FAN3)
33 System Panel Header (PANEL1)
34 Thermal Sensor header (TR1)
35 Auxiliary Panel Header (AUX_PANEL1)
36 Speaker Header (SPEAKER1)
37 Intelligent Platform Management Bus header (IPMB_1)
38 BMC SMBus Header (BMC_SMB_3)
39 BMC SMBus Header (BMC_SMB_2)
40 BMC SMBus Header (BMC_SMB_1)
41 Non Maskable Interrupt Button (NMI_BTN1)
42 COM Port Header (COM2)
43 Chassis ID0 Jumper (Chassis ID0)
44 CPU PECI Jumper (PECI1)
45 Chassis ID0 Jumper (Chassis ID1)
46 HDMI_SPDIF Header (HDMI_SPDIF1)*
47 Chassis ID0 Jumper (Chassis ID2)
48 Front Panel Audio Header (HD_AUDIO1)*
49 Rear Fan Connector (REAR_FAN1)
*Supports EPC612D8A and EPC612D8A-TB only
www.asrockrack.com