Table of Contents
Advertisement
Table 3. Features available on the rear of the system (continued)
Item
Ports, panels, or slots
7
VGA port
8
OCP NIC port
9
USB 3.0 port
10
USB 2.0 port
11
iDRAC dedicated port
12
NIC ports
For more information about the ports, see the Dell EMC PowerEdge R450 Technical Specifications on the product
documentation page.
Icon
Description
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for 16 seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
● If the system stops responding during POST, press and hold
Enables you to connect a display device to the system.
N/A
This port supports OCP 3.0. The NIC ports are integrated on the
OCP card which is connected to the system board.
This port is USB 3.0-compliant.
This port is USB 2.0-compliant.
Enables you to remotely access iDRAC. For more information, see
the iDRAC User's Guide at www.dell.com/poweredgemanuals.
The NIC ports that are integrated on the system board provide
network connectivity. These NIC ports can also be shared with
iDRAC when iDRAC network settings are set to shared mode.
button is enabled in the iDRAC setup.
the system ID button (for more than five seconds) to enter
the BIOS progress mode.
Dell EMC PowerEdge R450 system overview
11
Advertisement
Table of Contents
