Dukane Micromatic II 28A81C Operating Instructions Manual page 10

FIGURES
NOTE: The advance and rewind controls for filmstrip are located
on the film control panel. To advance the filmstrip rapidly,
move the film speed switch to the FAST position and
press the film advance button. For rapid rewind, press the
film reverse button. To advance or rewind the filmstrip
one frame at a time, move the film speed switch on the
control panel to the SINGLE position and follow the same
procedure for forward and reverse operation (Figure 3).
4.4 Starting the Presentation
1. At this point, the FOCUS frame should be centered and
focused. Follow the instructions on the FOCUS frame for
synchronization, (i.e.. Advance to next frame and start sound).
2. Depress the cassette control PLAY key. The sound will begin,
and the filmstrip will advance automatically.
3. Adjust volume control to a suitable sound level.
NOTE:
IF PICTURE IS BEHIND SOUND:
With the film speed switch in the SINGLE position, press the
advance button until the filmstrip is coordinated with the
sound.
7