Options; Alternate Output Connectors; Tamper-Resistant Hole Plugs; Optional 0.775V Input Sensitivity Setting - Crown CE 2000TX Operation Manual

CE2000TX Power Amplifier
5 Advanced Features
and Options

5.3 Options

5.3.1 Alternate Output Connectors

For added system flexibility, Crown offers optional
secondary output connectors, with a choice of either
model CEAS1 barrier block (see Figure 5.5) or
model CEAS2 5-way binding post connectors (see
Figure 5.6). Alternate output connectors may come
factory installed on new amplifier orders. They can
also be added to existing CE 2000TX amplifiers by
an authorized Crown Service Center. For more
information, please contact Crown Technical Sup-
port.

5.3.2 Tamper-Resistant Hole Plugs

Your CE 2000TX amplifier comes with a set of
tamper-resistant hole plugs, which allow you to
"protect" the level controls against unauthorized
adjustment. To use, simply pull off the control
knobs from the front of the amp, and slip the hole
plugs into place (see Figure 5.7). The plugs should
press easily into position with light force. Once in
place, the plugs will help to avoid most accidental
or intentional tampering (some situations may
require additional security measures).
To remove the hole plugs, simply pry the plug away
from the amplifier case using a small, flat-blade
screwdriver. To help to ensure adequate security, the
plugs have been designed to be more difficult to
remove than to place into position. If necessary,
Operation Manual
additional hole plugs can be purchased separately
from Crown's Parts Department (Part # 103234-1).
Store your knobs in a safe location should you need
to make level adjustments in the future.
5.3.3 Optional 0.775V Input
Sensitivity Setting
The CE 2000TX amplifier also provides an optional
0.775V input sensitivity setting. If you determine
your application requires this sensitivity setting,
please contact Crown Technical Support for more
information.
Figure 5.5 Model CEAS1 Barrier Block
Output Connectors
Figure 5.6 Model CEAS2 5-way
Binding Post Output Connectors
Figure 5.7 Tamper-Resistant Hole Plugs
Installed in a CE 2000TX Amplifier
page 19