Inserting And Removing A Memory Card - Canon DC410 Instruction Manual

1
Side [D/SC-C6VER_ fully toward
OPEN and gently open the disc
cover completely until it stops.
• Do not subject the camcorder to
strong impacts while the DISC
access indicator is on or flashing.
• Retract the grip belt under the
camcorder so it will not get in the
way of the disc cover.
• It may take a moment after sliding
[6!-sci_ _for the disc cover to
open.
2 Grab the edge of the disc and
gently puil it out.
Be careful not to touch the recording
surface of the disc or the pick up
lens.
3 Close the disc cover.
I£1IOITAIT
When you slide }DISC COVER} after making
a recording, important file allocation data
is updated on the disc before the disc
cover opens. While the DiSC access
indicator is on or flashing do not subject
the camcorder to shocks such as
forcefully laying it on a table.
inserting and Removing a Memory Card
You can use commercially available
_' SDHC (SD High Capacity)
memory cards, ,;_T_. SD memory
cards or MultiMedia Cards (MMC) with
this camcorder.
Make sure to initialize all memory cards
before using them with this camcorder
([Z3 57).
I !
I
i!¸i: i :;i
1 Turn off the camcorder.
2 Open the memory card slot cover.
3 insert the memory card straight,
with the [abe[ facing up, al the
way into the memory card slot
until it clicks.
4 Close the memory card slot cover.
Do not force the cover closed if the
memory card is not correctly inserted.
TO REMOVE T HEMEMORY CARD
Push the memory card once to
release it. When the memory card
springs out, pull it ai the way out.
I£1IOITAIT
Memory cards have front and back sides
that are not interchangeable. Inserting a
memory card facing the wrong direction
can cause a malfunction of the camcorder.
Be sure to insert the memory card as
described in step 3.
_ IOTES
Compatibility with all SD, SDHC or MMC
memory cards cannot be guaranteed.
Preparations• 27