Canon DC410 Instruction Manual page 2

important Usage instructions
WARNING!
TO REDUCE THE RiSK OF FiRE OR ELECTRIC SHOCK, DO NOT EXPOSE THiS
PRODUCT TO RAiN OR MOISTURE.
WARNING!
TO REDUCE THE RiSK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING
iNTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of copyright
owners and be contrary to copyright laws.
DVDCamcorder, DC420A/DC410 A systems
This device complies with Part 15 of the FCCRules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This
equipment generates, usesand can radiate radio frequency energy and, if not installed and use in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
)arficular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorientor relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Thecable with the ferrite core provided with the digital video camcorder must beused with this equipment in order to comply with
Class B limits in Subpart B of Part 15 of the FCCrules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
if such changes or modifications should be made, you could be required to stop operation of the equipment.
CanonU.S.A. Inc.
One Canon Plaza,Lake Success, NY11042, U.S.A.
Tel No.(516)328-5600
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WiDE BLADE OF PLUG TO WiDE SLOT, FULLY INSERT.
The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to disconnect the
plug in case of an accident,
Important Warning
CAUTION:
TO REDUCE THE RiSK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK}. NO USER=SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALiFiED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure, that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point, within an equilateral
triangle, is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.