Inserting And Removing A Memory Card - Canon DC410 Instruction Manual

Removing the Disc
1
DISC COVER
Slide
OPEN and gently open the disc
cover completely until it stops.
• Do not subject the camcorder to
strong impacts while the DISC
access indicator is on or flashing.
• Retract the grip belt under the
camcorder so it will not get in the
way of the disc cover.
• It may take a moment after sliding
DISC COVER
open.
2
Grab the edge of the disc and
gently pull it out.
Be careful not to touch the recording
surface of the disc or the pick up
lens.
3
Close the disc cover.
IMPORTANT
When you slide
a recording, important file allocation data
is updated on the disc before the disc
cover opens. While the DISC access
indicator is on or flashing do not subject
the camcorder to shocks such as
forcefully laying it on a table.
Downloaded From VideoCamera-Manual.com Manuals
fully toward
for the disc cover to
DISC COVER
after making

Inserting and Removing a Memory Card

You can use commercially available
SDHC (SD High Capacity)
memory cards,
cards or MultiMedia Cards (MMC) with
this camcorder.
Make sure to initialize all memory cards
before using them with this camcorder
( 56).
1
Turn off the camcorder.
2
Open the memory card slot cover.
3
Insert the memory card straight,
with the label facing up, all the
way into the memory card slot
until it clicks.
4
Close the memory card slot cover.
Do not force the cover closed if the
memory card is not correctly inserted.
SD memory
• 25
Preparations