Panasonic KX-F1050 Operating Instructions Manual page 66

8
Insert the film into the cartridg.e so that the
arrow on the open cartridge points in the
same direction as the arrows on the film.
• If you insert a film which is partially used,
insert the unused spool of the film in the
"FILM SUPPLY" mark side of the
cartridge.
.Insert the film Incorrect _
cores correctly
referring to the Correct _
illustration on the II
right.
Unused s
-- FILM SUPPLY
10
Roll the blue leader of the film by winding
the core gears until the leader is no longer
visible.
11
12
13
Close the covers of the cartridge by
locking the four tabs.
Turn over the cartridge and referring to
the illustration on the left, place the
"BACK" side of the cartridge into the unit
by inserting the side pins of the green
gears into the green holders. Then lower
the front of the cartridge into place.
Press the head unit down firmly until it
clicks into place.
Close the top cover securely by pushing
down on both sides.
• If the blue leader of the film is not wound
completely, the unit will automatically
advance it and the following message will
be displayed.
1 LOADING FILM I
• If the following message is displayed, the
film is not correctly inserted in the
cartridge.
I CHECK FILM 1
Reinsert it correctly by referring to step 8
above.
Gears
Blue leader
Tabs
Green gear
Green holder
66