AMERITECH vt1930 User Manual page 9

Vtech vt1930: user guide
Table of Contents

Advertisement

REPLACING THE BATTERY PACK
To Replace The Handset Battery
Pack Follow The Steps Below:
1. Remove the battery case cover by
pressing on the concave and
sliding downward.
PRESS and SLIDE
DOWNWARD
2. Discard the old battery pack. Don't
put the old battery pack in a trash
compactor or a fire - it could burst.
3. Place the new battery pack in its
housing with the metal contacts
facing down.
PLACE THE NEW
BATTERY PACK
INTO THE
BATTERY
COMPARTMENT
PLEASE NOTE THE
CORRECT POSITION
OF THE BATTERY
PACK WHEN
CHANGING BATTERY
4. Replace the battery case cover by
sliding the cover upwards.
AM 1930
5. If the new battery pack is not
already charged, place the hand-
set in the cradle of the base unit to
allow it to charge for 16 hours.
CAUTION:
To reduce the risk of fire or injury to
persons, read and follow the instruc-
tions
1. Use only battery 80-4134-00-00
pack.
2. Do not dispose of the battery in a
fire. The cell may explode.
IMPORTANT:
Do not dispose of this battery into
household garbage. For information
on recycling or proper disposal, con-
sult your local solid waste collection or
disposal organization.
3. Do not open or mutilate the battery.
Released electrolyte is corrosive
and may cause damage to the
eyes or skin. It may be toxic if
swallowed.
4. Exercise care in handling batteries
in order not to short the battery
with conducting materials such as
9
9
REPLACE THE
BATTERY COVER
9/5/99, 12:13 AM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Am 1930

Table of Contents