Table of Contents
Advertisement
ADVANCED FUNCTIONS
Clear/Delete (CLR/DEL) Key
The CLEAR and DELETE functions
can be accessed separately depending
on how long the key is held down. For
example, to clear the last digit entered
on the display, press the CLR/DEL
key for less than 1 second. Press and
hold the CLR/DEL key for more than
1 second to completely clear the
display.
The delete function is also used to
delete Caller ID records, memory dial
records, and Message Waiting
indication. See DELETING STORED
NUMBERS ( p.31), and MESSAGE
WAITING ( p.25 ).
The handset must be OFF to perform
a CLEAR or DELETE function.
Advanced Dialing
There are two different ways to dial a
number from the Handset
1. Press the PHONE key and wait
for a dial tone. Then dial the
number you want either manually,
using MEMORY (MEM) dialing,
Caller ID dialing or REDIAL.
2. Enter the number you wish to dial
on the display first. Then press the
PHONE key. This will dial the
number which is displayed on the
display after 2 seconds.
AM 1930
NOTE:
The phone will dial any number
which is shown on the display. If you
do not want to dial the number shown
on the display, it can be changed by:
•
Press and hold CLR/DEL
the display is cleared, then dial
normally.
•
Press OFF and start over.
Multi Level REDIAL
The Ameritech AM 1930 stores the
last five calls dialed in a special REDIAL
memory.
With the Handset OFF, press REDIAL .
The Handset will display the most recent
telephone number you dialed:
To view the other phone numbers
stored in the special REDIAL memory,
press the scroll keys
#
(
)a. Once you have found
the number you wish to dial, press
PHONE . After a 2 second pause, the
number will be dialed.
28
28
until
(
) and
*
9/5/99, 12:14 AM
Advertisement
Table of Contents
