Additional Operating Tips - AMERITECH vt1930 User Manual

ADDITIONAL OPERATING TIPS

Noise Or Interference
Your Ameritech AM 1930 cordless
telephone has auto-channel scan
circuitry which will detect excess noise
and change the channel of the phone
to reduce it. This is done automatically.
Since the Ameritech AM 1930 is a fully
digital phone, it does not suffer from
noise associated with regular cordless
phones. At times you may experience
occasional "drop outs", especially at
the extreme edges of the phone's
range. Simply move closer to the base
unit and this will disappear.
Automatic Security Coding
Your Ameritech AM 1930 phone is
factory set with 16.8 million possible
security codes. This unique security
code allows your handset and base to
recognize each other, and minimizes
the possibility of another cordless
phone using your telephone line.
Out Of Range indication
If the handset is moved to a point where
the base and handset can no longer
communicate, the handset will display
CHANNEL SEARCHING and scan all
channels in an attempt to re-link with
the base.
AM 1930
Out Of Range When Phone Is On
If you are presently engaged in a phone
conversation move closer to the base.
If the base unit does not communicate
with the handset within 25 seconds of
losing contact, it will automatically
hang up.
Out Of Range When Phone Is Off
When the phone is OFF, the handset
and base still monitor each other to
make sure that they can communicate.
If the handset is moved out of range,
the handset will display CHANNEL
SEARCHING. The handset will scan
all channels in an attempt to reestablish
communication with the base. This
process does not require user
intervention; the handset will re-link
with the base automatically once it is
brought back within range. The unit
will then be able to receive and place
calls.
36
36 9/5/99, 12:14 AM