Handset Ringer Volume; Base Unit Ringer; Handset Speakerphone Feature - VTech VT 1932 User Manual

BASIC TELEPHONE OPERATIONS

HANDSET RINGER VOLUME

• Press PROG.
• Press until RINGER is blinking.
• Press OK.
• Press until VOL is blinking.
• Press OK.
• Press or
ringer volume.
• When the desired setting is blinking,
press OK.

BASE UNIT RINGER

The Base Unit ringer volume is con-
trolled by a switch on the right edge of
the Base. It can be set to Off, Low, or
High volume.

HANDSET SPEAKERPHONE FEATURE

Press to make or answer a call
using the Handset Speakerphone. The
Handset displays SPEAKERPHONE. You
can now talk hands-free, away from the
Base Unit. Press OFF to end a call.
Call Waiting: If you hear a Call Waiting
tone during a speakerphone call, press
the key to answer it. (Do not use the
PHONE key to answer Call Waiting while
using the speakerphone.)
Switching from Speakerphone to Ear-
piece: At any time during a Handset
to raise or lower the
SPEAKER KEY
speaker call, you can press PHONE to
switch to a non-speaker call. The Hand-
set will display TALK, and you can hold
the Handset to your ear normally. Press
whenever you want to change back
to the Speakerphone. The Handset will
display SPEAKERPHONE.
15