Answering System-Remote Access Commands; Remote Access; Remote Access Commands - VTech t2351 User Manual

Answering System–Remote Access Commands

Remote Access

You can access many features of this system remotely from a touch tone phone.
1. Dial your telephone number.
2. When the system answers, enter your remote access code (preset to 19). The system
3. Enter a remote command (see Remote Access Commands).
4. Press * 0 to exit remote operation.
The system has voice prompts to help you with remote operation. Press #1 to hear your options
while remotely connected to the answering system

Remote Access Commands

Function:
Play messages in a mailbox
Repeat a message
Skip a message
Stop
30 BASIC OPERATION
beeps once and then announces the number of new messages.
Command:
Press #2. The system will play new messages.
If there are no new messages, the system plays old
messages.
Press #4 while message is playing; press #4#4 to back up
previous message.
Press #6 while message is playing; each press advances to the
next message.
Press #5.
www.vtechphones.com