Connecting The Print Server - Airlink101 A3-Port USB Print Server APSUSB2 Quick Installation Manual

Section 1
Warning: Only a USB printer may be connected to the USB port of the Print Server. Connecting any
other USB device to the Print Server may damage the Print Server.
Note: Do not plug the power cord to the Print Server until you have reached
Step 1Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other
end of the cable to a router.
Step 2 Make sure all the printers are powered OFF, then connect one end of the printer cable to the
printer port of the Print Server and attach the other end of the cable to the printer port of the printer.
Step 3 Power ON the printer(s).
Step 4 Plug one end of the power cord into the Print Server and the other end into an electrical outlet.

Connecting the Print Server

Step 4 of this section.